Meridian G65 Guia do Utilizador descarregar pdf (Página 60)

Configuring the G65

Digital Surround

Controller

Introduction

We recommend that you perform the calibration

procedure using the MSR+ and from the listening

position.

As you run the calibration procedure the name of each

calibration test is shown on the front-panel display,

followed by the parameters adjusted in the test.

Each calibration test uses a test signal designed to give

the best results.

Using a Sound Pressure Level meter

Although you can perform the calibration procedure by

ear, it is recommended that you perform the tests using

a Sound Pressure Level meter.

Set the Sound Pressure Level meter to C weighted,

and Slow. Take readings with the meter at the listening

position, pointing vertically. You should hold the meter

with an outstretched arm to minimise reflections from

your body.

You can choose to display and enter distances in either

feet and inches or metres.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 85 86

Sem comentários

Meridian G65 Guia do Utilizador Página 60